Cup Carrier Box with Lid Dieline Template

A short wide box with a lid, a tuck flap and a grid of round holes in the floor that hold the cups upright. Glue-free corners, with two tabs that lock into the lid. Enter your size below and download the dieline free.

Your size

Hole diameter (in)Hole diameter: the opening each cup goes through (test it with your real cup)Cups acrossCups across: how many cups in a rowCups alongCups along: how many rows of cupsWall height (in)Wall height: how tall the box is (the cups stand on the table or the floor below it, so choose it to match your cups)

BleedExtra artwork beyond the cut line, drawn as an orange line. 3 mm is the usual.Add size labels to the file

Free, no sign-up. The file always matches the size you typed, with or without labels.

Want us to make this box?

Send your size and we confirm the final dieline, then quote it. Your size is filled in for you.

Get a quote for this box

Preview

Click or Ctrl + scroll to zoom

Show measurements

Cut Crease

How the box goes together

Step 1

Fold along every blue line.

Step 2

Fold the four walls up; the two corner squares fold in against the back and front walls.

Step 3

Close the lid and push the two tabs on the front wall into the two slits.

Measurements and files

What to measure

Hole diameter	Hole diameter: the opening each cup goes through (test it with your real cup)
Cups across	Cups across: how many cups in a row
Cups along	Cups along: how many rows of cups
Wall height	Wall height: how tall the box is (the cups stand on the table or the floor below it, so choose it to match your cups)

The files

Formats	PDF, SVG and DXF
Size	Real size, in millimeters
Layers	Cut (red, solid) and Crease (blue, dashed); Perforation (green, long dashes) where a style has perforated lines; Bleed (orange) when you choose a bleed. Separate layers in SVG and DXF, separate colors in the PDF
Allowed sizes	15 to 800 mm per measurement (0.6 to 31.5 in)
Board thickness	Not compensated in this template; we confirm the final dieline with you

This is a draft for planning and artwork layout. After you share your dimensions, we create the final dieline and you approve it before anything is printed. See the materials, printing and finishes options on the Cup Carriers page.

Frequently Asked Questions

Are the dieline templates free?

Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.

Can I send this file straight to print?

Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.

How do I measure my product?

Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.

Which file should I download?

PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you tick "Add size labels to the file".

Can I make a cup carrier box with lid in a size that is not allowed here?

Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.

More cup carriers dielines

Browse all dielines →