Free Packaging Dieline Templates
A dieline is the flat pattern of a box: the cut lines and the fold lines. Type your box size, check the preview, and download a real-size file for your designer, free and with no sign-up.
Choose a template
Straight Tuck End Box
The classic carton: both tuck flaps open on the same side, so products slide in from one direction.
Open the template →Reverse Tuck End Box
Top and bottom flaps open on opposite sides, which suits products that stand upright and boxes packed on a line.
Open the template →Tuck End Box with Window
A straight tuck end box with a window cut in the front panel, so customers can see the product.
Open the template →Tuck End Box with Tube Holder
A tall tuck end carton for tubes: the front panel has a small holder shelf at each end, with an oval hole at the top and a slot at the bottom that hold the tube in place.
Open the template →Packaging Sleeve
A printed band that slides over a product or a box: a light way to add branding and swap seasonal designs.
Open the template →Two-Piece Lid and Base Box
A foldable two-piece box: a base and a slightly larger lid, each made from one flat sheet with glued corner tabs.
Open the template →Seal End Box
A carton whose ends close with overlapping flaps that are glued, so no tuck tab is needed. Common for machine-filled products.
Open the template →Tray and Sleeve Box
A one-piece tray that slides out of a printed sleeve: a gift-style box with a reveal.
Open the template →Hang Tag
A flat tag with rounded corners and a string hole, for clothing, candles, jars and gifts.
Open the template →Grid Dividers
Slotted cardboard strips that cross to split a box into equal compartments, so products do not knock together.
Open the template →Counter Display Tray
A one-piece box whose lid has tear-away ears: use it closed, or tear them off and fold the lid up into a header card to make a counter display tray.
Open the template →Round Sticker
A round sticker cut line in the diameter you need, for sealing boxes or branding jars and bags.
Open the template →Rectangle Label
A rectangular label with softly rounded corners, for boxes, bottles, jars and bags.
Open the template →Pillow Box
A light gift box with curved ends that pinch shut: pre-glued flat, popped open and closed by hand.
Open the template →Roll End Mailer Box
A one-piece corrugated mailer with rolled end walls and a side-hinged lid that tucks closed: strong and quick to set up, with no dust flaps and a plain front panel.
Open the template →Gable Box
A box with a flat roof and a carry handle that stands up on top: popular for treats, favors, bakery items and small gifts.
Open the template →Hexagonal Box
A six-sided box with a hexagon lid at each end: a geometric shape that stands apart from square packaging.
Open the template →Triangular Box
A three-sided prism box with a triangle lid at each end, for chocolate bars, tubes and gifts.
Open the template →Pentagonal Box
A five-sided box with a pentagon lid at each end: an unusual option for gifts and premium products.
Open the template →Octagonal Box
An eight-sided box with an octagon lid at each end: close to round, with flat faces for printing.
Open the template →Cube Box
A cube with six equal faces, built like a tuck end box: suits round or compact products such as bath bombs.
Open the template →Pyramid Box
A box that rises from a square base to a point, for gifts, ornaments and displays.
Open the template →Round Box
A round box made from a wrapped tube with a base disc and a lid disc: for candles, tea, cosmetics and gifts.
Open the template →Shipping Box (Regular Slotted)
The standard corrugated shipping box: four panels with a flap at each end, so the outer flaps meet in the middle.
Open the template →Round Tag
A round hang tag with a string hole, for gifts, candles and jars.
Open the template →Card and Flyer
A flat card or flyer trim line in the size you need: thank-you cards, scent cards, inserts and promo flyers.
Open the template →Folded Card
A card that folds in half, for greeting cards, thank-you notes and invitations. You enter the folded size.
Open the template →Header Card (Bag Topper)
A card folded over the top of a bag, with a hang slot so the pack hangs on a retail hook.
Open the template →Sticker Sheet
A sheet of round stickers, kiss cut so they peel off the backing: a grid with the size and count you choose.
Open the template →Cup Sleeve
A curved sleeve that wraps a tapered paper cup, keeping the cup comfortable to hold and carrying your brand.
Open the template →Standard Mailer Box
The classic mailer: a one-piece corrugated box with rolled end walls, a side-hinged lid with dust flaps and a front panel with rounded ears, locked with two tuck tabs in the floor slots.
Open the template →Mailer Box (No Dust Flaps)
A mailer whose lid has no dust flaps, so the whole inside is usable; the front panel keeps its rounded ears.
Open the template →Mailer Box (3 Flap Lock)
A mailer with a dust flap on each side of the lid and a plain front panel (no ears).
Open the template →Mailer Box with Adhesive Strip
A mailer that seals with a built-in adhesive strip on the front panel and opens along a tear strip, with dust flaps for protection.
Open the template →Mailer Box (With Lid)
A one-piece corrugated mailer with a hinged lid: roll-over end walls with a locking tab, a lid with rounded side flaps, and a front panel with a tuck flap and two tabs.
Open the template →Full Overlap Shipping Box (FOL)
A slotted shipping box whose outer flaps are the full width, so they overlap and cover the whole opening for extra strength.
Open the template →Half Slotted Shipping Box (HSC)
A slotted shipping box with flaps on the top only and an open bottom: it works as a lid that slides over a tray or a pallet load.
Open the template →Tuck End Box with Auto Bottom
A tuck lid on top and a self-locking bottom that snaps into shape when the box is opened, so it stays quick to set up.
Open the template →Tuck End Box with Full Flap Auto Bottom
An auto bottom where one wide flap covers the whole base, so the floor is closed and carries more weight.
Open the template →Tuck End Box with Snap Lock Bottom
A tuck lid on top and a bottom made of four rounded flaps that snap together, with no glue needed on the base.
Open the template →Reverse Tuck End Box with Lock
A reverse tuck end carton with a small locking tab on each wide panel, so the closed lids stay shut more firmly.
Open the template →Sloped Top Reverse Tuck End Box
A tuck end carton whose top slopes from the back down to the front, so the box leans forward on the shelf and the front panel is easy to read.
Open the template →5 Panel Hanger Box with Auto Bottom
A tuck end carton with a self-locking bottom and a double-thick hang tab on the back, so it hangs from a peg hook in a store.
Open the template →5 Panel Hanger Box with Snap Lock Bottom
A tuck lid on top, a snap lock bottom and a double-thick hang tab on the back for peg hook displays.
Open the template →5 Panel Hanger Box with Tuck Ends
A straight tuck end carton with a double-thick hang tab on the back, for small products that hang on a peg hook.
Open the template →Tuck-In Dispenser Box
A carton with a scooped opening on one panel, so customers can pull products out one at a time, and a lid that tucks in.
Open the template →Tuck End Sleeve
A sleeve with one tuck lid and an open bottom, so it slides over a tray, a bottle or a product.
Open the template →4 Corner Tray with Lid
A tray and a lid cut from one sheet and joined by a shared hinge wall, with a glue tab at each of the four corners.
Open the template →6 Corner Tray with Lid
A tray and lid in one sheet where one end wall folds to a point and the long walls have corner gusset creases.
Open the template →4 Corner Tray with Tuck Top
A glued-corner tray with an attached lid that folds over and tucks in, so it closes without a second piece.
Open the template →Collapsible 4 Corner Tray
A tray that folds up from a flat sheet and lies flat again, with corner creases on the long walls. Make the lid from the same sheet, a little larger.
Open the template →Reverse Tuck End Hanger Box
A reverse tuck end carton whose back wall has a wing at each end with a hang hole; the wings overlap to make a strong hang strip.
Open the template →Box with Half Circular Interlocking Flaps
A tray whose four walls each have a half-round flap; folded over the top, the round flaps lock into each other with no tape or glue on the lid.
Open the template →Pizza Box (One-Piece Corrugated)
A one-piece corrugated box with an attached lid, side walls with corner tabs, and a front lip that tucks in.
Open the template →Slotted Container with 1-2-3 Bottom
A corrugated shipping box with a slotted top and a bottom of four locking flaps, so the base needs no tape.
Open the template →Slotted Container with Auto Bottom
A corrugated shipping box with a slotted top and a self-locking bottom that pops into shape when the box is opened.
Open the template →Bookend Box
A carton with tuck lids at both short ends and an extra wrap-around lid panel, so the long side opens like a book and locks with a finger tab.
Open the template →Gable Carrier with Handle and Auto Bottom
A gable box with a carry handle in corrugated board: a roof strip and handle with a hand slot on the wide panels, gussets on the narrow panels, and an auto-locking bottom.
Open the template →Pop-Up Display Box with Auto Bottom
A display carton with a self-locking bottom and a tall riser on one side that stands up behind the products as a header panel.
Open the template →Classic Four-Flap Envelope
The classic paper envelope: a pointed top flap, a bottom flap and two side flaps, with overlap shoulders at the corners.
Open the template →Pointed Flap (Kite) Envelope
An envelope with a long pointed flap on every side: the four points fold in and meet in the middle, a classic look for invitations and cards.
Open the template →Wide Envelope with Square Flaps
A wide (landscape) envelope with a trapezoid top flap, a deep rounded bottom flap and narrow side flaps with chamfered ends.
Open the template →Wide Envelope with Angled Flaps
A wide (landscape) envelope with trapezoid top and bottom flaps and rounded side flaps that run past the fold lines.
Open the template →Pocket Envelope with Closing Flap
A small pocket envelope folded from one sheet, glued along two edges, with a short round-cornered flap to close the open end.
Open the template →Open-End Pocket Envelope
A plain pocket envelope: one sheet folded in half and glued along two edges, with the end left open.
Open the template →Tall Envelope with Hang Slots
A tall pocket envelope with a hanging flap that has a round ear and a hang slot, so it hangs on a retail hook. The lower panel ends in a wavy edge.
Open the template →Tall Envelope with Thumb Tab
A tall envelope with a lid that has side tabs and a slit, and a lower panel with a round thumb tab that is pushed through the slit to close it.
Open the template →Tall Envelope with Tuck Tab
A tall envelope with a lid that has side tabs and a slit, and a short bottom flap with a small round tab that tucks into the slit.
Open the template →Flat Envelope with Arc Slot
A flat pocket envelope for gift cards, documents and presentations: a front panel with a finger scoop and an arc-shaped slit, and a round-ended flap that tucks into the slit.
Open the template →Bag Shaped Box
A box shaped like a small paper bag: gusset sides, a rounded flap that folds over the top and a small tab that locks it.
Open the template →Four Corner Tray with Glue Flaps (Collapsible)
A one-piece tray: a bottom panel with a side panel on each long edge and an end panel on each short edge. The side panels have diagonal corner creases and each end panel has two glue flaps.
Open the template →Shoe Box (One Piece with Lid)
A one-piece box with a lid hinged to the back wall: double-layer end walls with a round thumb hole, corner flaps with rounded scoops, and a lid skirt with two tuck tabs.
Open the template →Octagon Gift Box (Tapered)
An eight-sided gift box that is wider at the top: a fan of eight wall panels, a big octagon lid hinged to one wall and a small octagon bottom.
Open the template →Octagonal Tray with Lid
An eight-sided tray with four straight walls, four corner pieces with slots, and a lid hinged to one wall with three tabs.
Open the template →Octagonal Flip-Top Box
An eight-sided box made of alternate wide and narrow panels, with a flip-over lid and tuck tab and an auto-lock bottom with a slotted flap.
Open the template →Octagonal Base and Lid Box
A two-piece eight-sided box: a base and a slightly larger lid, each with a floor, three-layer walls with hook tabs and four diagonal strips.
Open the template →Pillow Box with Hang Tab
A pillow box drawn with a narrow middle panel between a front and a back panel, lens-shaped end flaps, bow-tie tabs and a hanging flap with a round hang tab.
Open the template →Standing Pillow Box (Hang Hole)
A pillow box with a flat base and a hanging flap with two peg holes that line up when it is folded in half, so it can hang on a retail hook.
Open the template →Standing Pillow Box (Notch)
A standing pillow box with two arched tops, a round notch in one arch, a gusset beside each panel and a bottom closed by short and long flaps.
Open the template →Pillow Box with Handles
A pillow box with a round lobe at each end of its two panels and a handle slot in each side flap, so it can be carried by the handle.
Open the template →Middle Opening Pillow Box
A pillow box with a central panel, a hexagon-like flap above and below it, curved side wings and a small round tab that fits a slit.
Open the template →Tuck End Box with Tear Strip
A tuck end carton with a perforated tear strip across the flap above the front panel, and a stepped locking bottom.
Open the template →Gable Box with Ear Handle
A gable box with a carry handle: a small round ear at each top corner of the handle, an oval hand slot, a glue flap on one side and pointed gussets with a slit.
Open the template →Gable Box with Tapered Roof
A gable box whose roof band narrows towards the handle, with a rounded ear on each side of the handle, a long hand slot and rounded gussets with a slit.
Open the template →Gable Box with Curved Handle
A gable box with a curved top: the sides bow in and flare out into round ears, the top is a shallow dome with a half-oval hand slot, and the gussets are domes with a slit.
Open the template →Gable Box, Vertical Layout
A gable box drawn as one tall sheet: a handle strip at each end of the center column, a bottom panel in the middle, and side panels with rounded flaps and slits on both sides.
Open the template →Gable Box with Side Ear Tabs
A gable box drawn as one tall sheet with a handle strip at each end, round ear tabs on the side edges, side walls with tab slots and bottom flaps with slits.
Open the template →Gable Meal Box (Auto Lock)
A low, wide gable meal box with a handle on each long wall, end gussets with lock slots and tab strips whose notches lock into them.
Open the template →Pizza Box with Holes
A one-piece pizza box: a lid with a rounded tuck tab and rounded side flaps, glued side flaps beside the side walls, and round holes in the back wall and the front lip.
Open the template →Pizza Box with Tuck Strip
A one-piece pizza style box: a lid with a tuck strip and ear flaps, rounded side flaps, side walls with outer flaps, and a front lip with a small bump.
Open the template →Pizza Slice Box (Triangular)
A box for a single pizza slice: a flat strip with two big panels that fold up in a V, side tabs, and slits that lock the lower panels.
Open the template →Pizza Box, Lid and Base Side by Side
A long corrugated sheet with the lid on the left and the base on the right, joined by a hinge strip, with lock slots, hook cut-outs and stepped top and bottom flaps.
Open the template →Pizza Box with Angled Corner Flaps
A pizza box with a rounded tuck tab and chamfered lid shoulders, side strips with a slanted corner gusset, a notch in the back fold and a plain front wall.
Open the template →Octagonal Pizza Box
An eight-sided pizza box: an octagon floor with four straight walls and four long diagonal strips with ears, hinged to an octagon lid with rounded tabs and a half-round tuck.
Open the template →Dispenser Box with Perforated Opening
A carton with a tuck top and a locking bottom, and a perforated arc across the front panel that tears out to open a dispensing window.
Open the template →Sleeve with Carry Handle
A wrap-around sleeve strip with a two-part handle on top: a rounded top bar and two necks with hand slots, plus a thin slot in the last panel.
Open the template →Tab Lock Sleeve
A sleeve strip folded into a tube and locked with two small tabs at the bottom edge that fit into two slits at the top, so it needs no glue.
Open the template →Wrap Sleeve with Ear Tabs
A wide wrap-around sleeve strip with five panels, rounded corners and a small ear tab on each side.
Open the template →Gourd Shaped Sleeve
A tall sleeve strip in a gourd shape: two round bulges with a narrower waist between them, two slots, fold lines across and a glue flap at the narrow end to close the sleeve.
Open the template →Handle Strip Sleeve
A long sleeve strip with rounded ends and a rounded hand slot at each end, folded round a box so the two ends make a carry handle.
Open the template →Tent Cup Carrier
A one-piece strip with a handle at each end. Folded into a tent, the two handles meet so the hand slots line up, and each cup sits in a round hole in the base.
Open the template →Tent Cup Carrier (4 Cups, 2 x 2)
The tent carrier with four holes in a 2 x 2 grid and wide handles with a long hand slot, so it holds four cups.
Open the template →Cup Carrier Box with Lid
A short wide box with a lid, a tuck flap and a grid of round holes in the floor that hold the cups upright. Glue-free corners, with two tabs that lock into the lid.
Open the template →Cup Holder Strip
A plain strip with a round hole in the middle and a hand slot at each end. Two folds bring the slots together as a handle, and the cup goes through the hole.
Open the template →Cup Holder Strip with Handle Slots
A rounded strip with a round hole in the middle and a long hand slot near each end. Bent over the cup, the two slots meet as a handle.
Open the template →Two-Piece Double Wall Box
A foldable two-piece box, base and lid on one sheet: two walls of each piece fold into a double layer and the other two carry corner flaps.
Open the template →Shoe Box (Hinged Lid with Corner Locks)
A one-piece box with a lid hinged to a long wall: a corner flap and ear at each wall corner, a thumb notch in each end wall, and a lid with thumb holes and a wavy double-folded front skirt.
Open the template →Rectangular Shoe Box (Hooked Side Tabs)
A one-piece rectangular box with a lid hinged to the back wall: a tuck flap and two side flaps on the lid, and hooked tabs on the back and front walls that lock into a slot in each side wall.
Open the template →Folding Shoe Box (Tuck Lid with Wall Flap Locks)
A one-piece shoe box with the lid hinged to the back wall: a lid skirt that folds double with two tuck tabs, double-layer end walls, and four wall flaps that lock with hook cut-outs.
Open the template →Shoe Box with Rope Handle Holes
A one-piece box with a lid hinged to the back wall: a lid with a hand slot, double-layer end walls with round holes, side flaps, and two small holes in the front wall for a rope handle.
Open the template →
What you get
Cut lines
Solid red lines. This is where the box is cut out of the sheet.
Crease lines
Dashed blue lines. This is where the board folds.
Perforation lines
Long green dashes. Small cuts where a part can tear out or bend easily.
Bleed line
Optional orange line, 3 mm or 5 mm outside the cut. Artwork runs out to it.
Real size
Files are in millimeters at full scale. Print at 100% to check the size.
Separate layers
SVG and DXF files put cut, crease, perforation and bleed on separate layers. In PDFs they are separate colors.
Which file to download
PDF file
Opens in Adobe Illustrator, Acrobat and any PDF viewer.
SVG file
Opens in Illustrator, Inkscape, Affinity and Figma, and in a web browser.
DXF file
For CAD and die-making software such as AutoCAD.
Frequently Asked Questions
Are the dieline templates free?
Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.
Can I send this file straight to print?
Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.
How do I measure my product?
Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.
What sizes can I enter?
Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.
Need a different box or a custom size?
Share your dimensions and we will draw the dieline for you.
+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT