Shoe Boxes Dielines
Footwear boxes: hinged lid, folding and rectangular shoe boxes, and a box with rope handle holes. Type your size, check the preview, and download a free, printable, real-size file for your designer, with no sign-up. It opens in Adobe Illustrator.
5 templates
Shoe Box (One Piece with Lid)
A one-piece box with a lid hinged to the back wall: double-layer end walls with a round thumb hole, corner flaps with rounded scoops, and a lid skirt with two tuck tabs.
Open the template →Shoe Box (Hinged Lid with Corner Locks)
A one-piece box with a lid hinged to a long wall: a corner flap and ear at each wall corner, a thumb notch in each end wall, and a lid with thumb holes and a wavy double-folded front skirt.
Open the template →Rectangular Shoe Box (Hooked Side Tabs)
A one-piece rectangular box with a lid hinged to the back wall: a tuck flap and two side flaps on the lid, and hooked tabs on the back and front walls that lock into a slot in each side wall.
Open the template →Folding Shoe Box (Tuck Lid with Wall Flap Locks)
A one-piece shoe box with the lid hinged to the back wall: a lid skirt that folds double with two tuck tabs, double-layer end walls, and four wall flaps that lock with hook cut-outs.
Open the template →Shoe Box with Rope Handle Holes
A one-piece box with a lid hinged to the back wall: a lid with a hand slot, double-layer end walls with round holes, side flaps, and two small holes in the front wall for a rope handle.
Open the template →
Frequently Asked Questions
Are the dieline templates free?
Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.
Can I print the box template?
Yes. Open the PDF and print it at 100 percent (actual size, with no fit-to-page scaling) to check the size against your product or to cut a mock-up. The file is real size, in millimeters. A small box fits on one sheet; for a bigger one, print it tiled across several sheets or take the file to a print shop.
Can I open the template in Adobe Illustrator?
Yes. Open the PDF or the SVG in Illustrator and the cut and crease lines come in as lines you can edit, ready for your artwork. We do not provide native .ai files; the PDF and SVG are the files designers use for this.
Can I send this file straight to print?
Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.
How do I measure my product?
Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.
Which file should I download?
PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you check "Add size labels to the file".
What sizes can I enter?
Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.
Need a different box or a custom size?
Share your dimensions and we will draw the dieline for you.
+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT