Dividers Dielines
Slotted strips that split a box into compartments. Type your size, check the preview, and download a free, printable, real-size file for your designer, with no sign-up. It opens in Adobe Illustrator.
6 templates
Grid Dividers
Slotted cardboard strips that cross to split a box into equal compartments, so products do not knock together.
Open the template →Partition Dividers with Stepped Ears
A set of four partition panels, each with an ear on its right edge that steps down from panel to panel.
Open the template →Slotted Cross Divider Set
Two slotted sheets that cross to split a box into cells: one slotted from both edges, one slit across its fold.
Open the template →Double-Fold Slotted Divider Set
Two divider sheets with wide notches and a double crease, so the folds leave room for the board thickness.
Open the template →Folding Insert with Double-Crease Walls
A one-piece insert: a floor with four double-crease walls and flaps that fold over to make a tray inside the box.
Open the template →Tray with Angled Flaps
A simple open tray: a floor with a trapezoid wall on each side that folds up and leans slightly outward.
Open the template →
Frequently Asked Questions
Are the dieline templates free?
Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.
Can I print the box template?
Yes. Open the PDF and print it at 100 percent (actual size, with no fit-to-page scaling) to check the size against your product or to cut a mock-up. The file is real size, in millimeters. A small box fits on one sheet; for a bigger one, print it tiled across several sheets or take the file to a print shop.
Can I open the template in Adobe Illustrator?
Yes. Open the PDF or the SVG in Illustrator and the cut and crease lines come in as lines you can edit, ready for your artwork. We do not provide native .ai files; the PDF and SVG are the files designers use for this.
Can I send this file straight to print?
Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.
How do I measure my product?
Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.
Which file should I download?
PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you check "Add size labels to the file".
What sizes can I enter?
Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.
Need a different box or a custom size?
Share your dimensions and we will draw the dieline for you.
+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT