Cup Carriers Dielines
Carriers that hold two to six cups: tent carriers with a hand slot, carrier boxes with round holes and handle carriers with a cup insert. Type your size, check the preview, and download a real-size file for your designer, free and with no sign-up.
5 templates
Tent Cup Carrier
A one-piece strip with a handle at each end. Folded into a tent, the two handles meet so the hand slots line up, and each cup sits in a round hole in the base.
Open the template →Tent Cup Carrier (4 Cups, 2 x 2)
The tent carrier with four holes in a 2 x 2 grid and wide handles with a long hand slot, so it holds four cups.
Open the template →Cup Carrier Box with Lid
A short wide box with a lid, a tuck flap and a grid of round holes in the floor that hold the cups upright. Glue-free corners, with two tabs that lock into the lid.
Open the template →Cup Holder Strip
A plain strip with a round hole in the middle and a hand slot at each end. Two folds bring the slots together as a handle, and the cup goes through the hole.
Open the template →Cup Holder Strip with Handle Slots
A rounded strip with a round hole in the middle and a long hand slot near each end. Bent over the cup, the two slots meet as a handle.
Open the template →
Frequently Asked Questions
Are the dieline templates free?
Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.
Can I send this file straight to print?
Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.
How do I measure my product?
Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.
Which file should I download?
PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you tick "Add size labels to the file".
What sizes can I enter?
Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.
Need a different box or a custom size?
Share your dimensions and we will draw the dieline for you.
+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT