Envelopes Dielines
Paper envelopes with their flaps. Type your size, check the preview, and download a real-size file for your designer, free and with no sign-up.
10 templates
Classic Four-Flap Envelope
The classic paper envelope: a pointed top flap, a bottom flap and two side flaps, with overlap shoulders at the corners.
Open the template →Pointed Flap (Kite) Envelope
An envelope with a long pointed flap on every side: the four points fold in and meet in the middle, a classic look for invitations and cards.
Open the template →Wide Envelope with Square Flaps
A wide (landscape) envelope with a trapezoid top flap, a deep rounded bottom flap and narrow side flaps with chamfered ends.
Open the template →Wide Envelope with Angled Flaps
A wide (landscape) envelope with trapezoid top and bottom flaps and rounded side flaps that run past the fold lines.
Open the template →Pocket Envelope with Closing Flap
A small pocket envelope folded from one sheet, glued along two edges, with a short round-cornered flap to close the open end.
Open the template →Open-End Pocket Envelope
A plain pocket envelope: one sheet folded in half and glued along two edges, with the end left open.
Open the template →Tall Envelope with Hang Slots
A tall pocket envelope with a hanging flap that has a round ear and a hang slot, so it hangs on a retail hook. The lower panel ends in a wavy edge.
Open the template →Tall Envelope with Thumb Tab
A tall envelope with a lid that has side tabs and a slit, and a lower panel with a round thumb tab that is pushed through the slit to close it.
Open the template →Tall Envelope with Tuck Tab
A tall envelope with a lid that has side tabs and a slit, and a short bottom flap with a small round tab that tucks into the slit.
Open the template →Flat Envelope with Arc Slot
A flat pocket envelope for gift cards, documents and presentations: a front panel with a finger scoop and an arc-shaped slit, and a round-ended flap that tucks into the slit.
Open the template →
Frequently Asked Questions
Are the dieline templates free?
Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.
Can I send this file straight to print?
Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.
How do I measure my product?
Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.
Which file should I download?
PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you tick "Add size labels to the file".
What sizes can I enter?
Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.
Need a different box or a custom size?
Share your dimensions and we will draw the dieline for you.
+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT