Skip to main content
PacksDo

Grid Dividers Dieline Template

Slotted cardboard strips that cross to split a box into equal compartments, so products do not knock together. Enter your size below and download the free, printable template (PDF, SVG or DXF; it opens in Adobe Illustrator).

Your size

Cut Crease

Free, no sign-up. The file always matches the size you typed, with or without labels.

Want us to make this divider?

Send your size and we confirm the final dieline, then quote it. Your size is filled in for you.

Get a quote for this divider

Preview

Preview

Cut Crease

Tap the drawing to zoom

How the box goes together

Step 1

Slide the cross strips (slots cut from the bottom) down over the long strips (slots cut from the top).

Step 2

The slots are half the height, so the strips lock flat together.

Step 3

Place the grid inside the box.

Measurements and files

What to measure

Cell lengthLength of one compartment
Cell widthWidth of one compartment
HeightHeight of the dividers (the inside height of the box)
Cells along the lengthHow many compartments in a row along the length
Cells along the widthHow many compartments in a row along the width

The files

FormatsPDF, SVG and DXF
SizeReal size, in millimeters
LayersCut (red, solid) and Crease (blue, dashed); Perforation (green, long dashes) where a style has perforated lines; Bleed (orange) when you choose a bleed. Separate layers in SVG and DXF, separate colors in the PDF
Allowed sizes15 to 800 mm per measurement (0.6 to 31.5 in)
Board thicknessNot compensated in this template; we confirm the final dieline with you

This is a draft for planning and artwork layout. After you share your dimensions, we create the final dieline and you approve it before anything is printed. See the materials, printing and finishes options on the Box Dividers page.

Frequently Asked Questions

Are the dieline templates free?

Yes. Type your size, check the preview and download the file. There is nothing to pay and no sign-up.

Can I print the box template?

Yes. Open the PDF and print it at 100 percent (actual size, with no fit-to-page scaling) to check the size against your product or to cut a mock-up. The file is real size, in millimeters. A small box fits on one sheet; for a bigger one, print it tiled across several sheets or take the file to a print shop.

Can I open the template in Adobe Illustrator?

Yes. Open the PDF or the SVG in Illustrator and the cut and crease lines come in as lines you can edit, ready for your artwork. We do not provide native .ai files; the PDF and SVG are the files designers use for this.

Can I send this file straight to print?

Treat it as a starting point for your artwork layout. Board thickness is not compensated, and exact flap sizes depend on the production line. After you request a quote and share your dimensions, we create the final dieline and you approve it, together with your artwork, before production begins. A structural sample lets you test the fit first.

How do I measure my product?

Measure the longest, widest and tallest points of the product, in that order: length, width, height, and allow a little room if it must slide in and out. Our measuring guide shows which side is which.

Which file should I download?

PDF opens in Illustrator, Acrobat and any PDF viewer. SVG opens in Illustrator, Inkscape, Affinity and Figma. DXF is for CAD and die-making software. In all three the file is real size. The cut and crease lines (and the perforation lines, where a style has them) are on separate layers in the SVG and DXF files, and are separate colors in the PDF. The bleed line (orange) appears only when you choose a bleed. The measurement lines you see in the preview help you check the size; they are not in the downloaded files unless you check "Add size labels to the file".

Can I make a grid dividers in a size that is not allowed here?

Each measurement can be between 15 and 800 mm (0.6 to 31.5 in). For anything outside that range, or a different structure, request a quote and we will draw it for you.

More dividers dielines

Browse all dielines →

Ready to order custom box dividers?

Free design support. Production takes 5–7 working days after approval.

+1 (312) 910-5253Monday–Friday, 9:00 AM to 6:30 PM CT